The Spar Pent concrete shed offers incredible value for money. Delivered and erected including a 3ft timber personnel door, a 4ft single glazed timber framed window and timber fascia. The roof sheets are steel with a Graffotherm coating on the under-side; these are fixed to robust galvanised steel roof joists. Various optional extras can be added to enhance this building such as upgrading to a steel personnel door or adding guttering and a sand & cement fillet.
x :Side of building size excluding roof overhang (roof overhang is approx. 7cm at the front and 18cm at the back if guttering is specified)
y :Highest point of roof
z :Eaves height - where the roof starts to slope upwards
This building is available in 6 widths and 6 lengths, 36 standard sizes.
6’(1.83m), 8’(2.44m), 10’(3.05m), 12’(3.66m), 14’(4.26m), 16’(4.88m)
6’(1.83m), 8’(2.44m), 10’(3.05m), 12’(3.66m), 14’(4.26m), 16’(4.88m)
X= Shed length as above
Y= Front height - 7’1”(2.16m)
Z= Rear height – 6’9”(2.05m)
N.B. guttering to the rear increases the overall shed length by 6”(15cm)
Internal rear height (lowest point) -195cm
Internal front height – 212cm
Concrete panels – 75mm thick multi-spar concrete panels with steel re-enforcement bars.
Personnel door – 3ft (91cm) wide x 197cm high factory-treated timber, includes 2 keys. Door aperture is 80cm x 174cm.
Window – 122cm wide x 78cm high, factory-treated timber frame with single glazed glass, non-opening.
Fascia – treated timber to front, rear and both sides.
Roof sheets – full length galvanised steel roof sheets with
Graffotherm anti-condensation treatment on the underside.
Roof trusses – galvanised steel C-section 95mm x 50mm.
Guttering – optional extra but recommended.
Sand & cement fillet – optional extra but recommended.
Specify black, white or brown guttering to the sides of your apex building or to the rear of your pent shed. Includes downpipe(s) as necessary.
Sand and Cement Fillet
This is optional, but strongly recommended. A mortar fillet applied to the inside of your shed walls helps to prevent water ingress.
No need for future painting or maintenance. Up-grade your fascia, available in white, golden oak, rosewood or anthracite grey.
Extra High Building
Add additional height to your shed, on apex sheds this can be 7ft eaves or 7’6” eaves, on pent sheds this can only be 7’6” (standard eaves height is 6’6”).
These are supplied in a pack of 12. They enable a piece of timber (not supplied) to be fixed to the inside of the concrete shed panels. This can then be boarded over to line all or part of your building.
The Shelf Stack is available 2ft, 4ft or 6ft wide, six shelves high.
Sectional Brick Finish
Change some or all of the walls of your concrete shed to this attractive Brick Effect wall panels. 4 styles are available; Antique Red, Tuscan Red, Tudor Brown or Buff. The Antique Red or Buff panels can have accent colours added in, this is shading to an occasional brick on the panel.
This is a site-applied rendered finish available in 4 different colours; Palace Grey, French Stone, White or Magnolia. Your shed will be delivered and erected using plain, non-spar panels then the textured finish is added afterwards.
An attractive PVCu cladding is affixed to the walls of the shed, this comes in 6 different colours; White, Sand, Cream, Light Blue, Light Grey and Green.
Steel Personnel Door
Steel Personnel Door – Upgrade the timber door to steel. Available in 3ft or 4ft with, includes multi-point locking as standard.
Wider Timber Personnel Door
Upgrade the standard 3ft personnel door to a 4ft door.
Georgian Steel Personnel Door
This steel personnel door has 3 panels to give it the Georgian style, complete with multi-point locking. Available in 3ft wide only.
Fully Glazed UPVC Door
A great looking maintenance-free personnel door, this door has double-glazed windows top and bottom and is available in 3ft or 3’6” widths.
Half Glazed UPVC Door
This door has a panel of double-glazing at the top and a white UPVC panel at the bottom, available in 2 widths; 3ft or 3’6”.
Fully Panelled UPVC Door
For additional privacy, this door is ideal, both the top and bottom panels are white UPVC. Comes in two widths; 3ft or 3’6”.
For additional privacy but not at the expense of extra light, obscure glass can be specified.
Timber Framed Window
Add additional windows with these single-glazed, timber-framed units. Choose from 2ft wide or 4ft wide, they are only available fixed, non-opening.
UPVC White Window
If your garage comes as standard with a timber framed window, this can be up-graded to a maintenance-free white UPVC window, 2ft or 4ft wide and either opening or fixed.
UPVC Rosewood Window
The Rosewood UPVC window is a classy-looking addition to your garage. It can be opening or fixed, choose from 2ft wide or 4ft wide.
UPVC Golden Oak Window
An attractive light brown wood-effect UPVC window, choose from 2 widths; 2ft or 4ft. This window can be fixed or opening.
UPVC Anthracite Window
Specify the modern looking grey anthracite window in maintenance-free UPVC. There are 2 widths; 2ft and 4ft and these can be specified as opening or fixed.
A great security and safety feature, laminated glass can be added as a further option to any of the UPVC windows.
There are six price bands that cover mainland England, Scotland & Wales, please find below a postcode key. Postcodes in column A are priced as per website, columns B to F all carry a delivery charge relative to the distance from the factory. This will be added on during the purchasing process. To find an approximate percentage that the delivery charge will add, please see below. Please note these percentages are not exact and will vary depending on size and model of your concrete shed;
|A||Priced as per website|
|B||Standard and Deluxe sheds add approx 5%|
|C||Standard and Deluxe sheds add on approx 10% -12%|
|D||Standard sheds add on approx 35% and Deluxe sheds approx 25%|
|E||Standard sheds add on approx 55%-60% and Deluxe sheds approx 35%|
|F||Standard sheds add on approx 95%-105% and Deluxe sheds approx 75%|
What is the delivery lead time?
Currently the lead time is around 25 weeks.
What is included in the price?
All prices include delivery, installation, VAT and a 10 year manufacturer’s warranty.
What base do i need for my concrete shed?
You will need a 10cm (4”) thick, flat, level concrete base, 15cm (6”) longer and 15cm wider than the size of the building. We recommend that your base is slightly higher than the surrounding area in order to help keep to your shed dry. Slabs, Tarmac or Block Paving are not suitable bases for a concrete shed.
Are the concrete shed dimensions internal or external?
The dimensions given are external to the outside of the concrete panels. When measuring up, please allow for roof overhang and guttering. Internal shed dimensions are 6" (15cm) less than external.
What size vehicle will my concrete shed be delivered on?
Your building will be delivered on a large rigid truck or an articulated lorry. This is unloaded with a forklift and then the panels are transferred to a trolley, see below regarding access.
What kind of access do i need for delivery of my building?
As most concrete sheds are in back gardens, the installers will need to be able to wheel the concrete panels 2 at a time on a trolley via an unrestricted route from the delivery wagon to the concrete base. Small steps will need to be ramped and lawns will need to be boarded to facilitate delivery.
What guarnatee do i get with my building?
The concrete buildings carry a 10 year structural guarantee, the personnel doors and windows have a 2 year guarantee.
Do i need planning permission?
Very occasionally, planning permission is required. The Planning department of your local authority should be able to help you further with this; it may be worth looking on their website.
What are the payment terms for concrete sheds?
We take a 20% deposit if the concrete shed is ordered in person at our premises or over the phone. The balance is payable 14 days prior to installation. If ordered on-line please pay in full.
Can you do made to measure buildings?
Yes we can, within reason, as long as the building is square or rectangular. If you require a 9’ x 11’6” for example, please refer to the next standard size up – 10’ x 12’ for pricing. We cannot supply concrete buildings with walls that taper from front to back or that do not have 90 degree corners.